New Power Seat Slider Easy
Step-By-Step Installation Guide.

 

 

-First, locate your front seat ;-)

-With the seat all the way up to give you some room to work on the rails.

-Move the seat back and remove the front trim covers using a Phillips screw driver.

-Then, remove the 2 front rail bolts using a 13mm socket.

-Move the seat forward and remove the rear trim covers.

-Remove the 4 remaining bolts with a 13mm socket.

-Don't forget to disconnect the power seat electrical connector.

-Lift the seat and turn it so that the seat is facing your stomach.

-Carefully angle the seat out the driver's door.

-The use a table or work bench will help, you can use a towel to protect your seat.

-Locate the horizontal actuator "plastic slider gear box" holding the seat track.

-Find the two  screws holding the actuator in place.

-Remove the screws using a 10 mm wrench.

-Once the bolts are out, just a slight tug and the gear box falls out.

-Once the gear box out, push the slider track out toward the front of the seat.

-Once the sliding track removed from the rail. Note the quality of the old sliders... ?

-Simply remove all of these old broken sliders.

-Ensure the seat track is clean and free of debris before installing the new sliders.
-Make sure the curved parts of the sliders face outward when reinstalling.
-Apply lubricant to steel track. I used a multi purpose synthetic based lubricant with 
    Teflon to prevent friction and wear. Withstands temperatures from -45F. to 450F.
-Now that you are well greased-up :-) You can start the reassembly.
-Introduce the track back into the seat rail.
-Reinstall the Plastic gear box.
-Carefully put the seat back in place and reconnect the power seat electrical     
    connector. Now don’t forget to bolt the seat back in place… ;-)
-That’s it, you’re all done !!! Care for a test drive ?
 

 

 

**Note** By ordering and or installing this product

 Or any other Custom After Market products from  ESDSCo.

I agree to the following  statement :

 

I am the sole person (s) responsible for any damages and or injuries resulting from the installation

and or the use of any of our after market products on my motor vehicle and at no time will I

 personally and or by a third party engage into legal actions

and or any other  type of actions against the people that have designed and or sold and or manufactured these products.

By ordering any of these products for yourself and or someone else,

You automatically agree in you name and or for anyone else to the above-mentioned product (s) purchase agreement.